Wrekin Water Softeners New ECO35M1 Metered Water Softener is ideally suited to larger homes requiring high flow rates, and a high softened water capacity. The industrial quality control valve enables it to be connected to 28mm pipework or above. Port size of 1" male connectors allow use of our 28mm Fixing Kit to make for easy installation.

This Softener has a special Water Saving Programme unique to Wrekin Water Softeners. Reduces regeneration time which saves salt and offers considerable waste Water Savings compared to many conventional softeners and up to 40% compared to a standard Autotrol Valve

The electronic control system on this softener meters daily water usage, and will select for itself the ideal regeneration day to ensure economical salt usage with the minimum of waste water. The low waste water program on this machine is unique to Wrekin Water Softeners. This brings the total waste water to <2.5% of Total Soft Water Produced
This Softener comes fully assembled and easily installed by a competent plumber. This machine has as standard Logix Digital Control making this machine much easier to programme, whilst the controller gives much more data to get optimum performance from the machine

Machine comes complete with full instructions and Hardness Test Kit. All that is required to set is

Time of Day

Day of Week

Hardness level in PPM


Maximum Flow (L/pm) 85
(G/pm) 18.7

Minimum Flow (L/pm) 3.3
(G/pm) 0.72

Capacity (Ltrs) 5850
@ 300 ppmCaCO³

Regen Waste Water (Ltrs) <100 Ltrs

Salt used per regen (Kg) 4


Minimum operating pressure (bar) 1.175
(psi) 25

Maximum operating pressure (bar) 6
(psi) 85

Pressure Drop @ max flow (bar) 2
(psi) 25
Dimensions
Softener Height (mm) 1190
Softener Depth (mm) 520
Softener Width (mm) 325

Connections (in/out) (Inch) 1”

Drain Connection (Inch) ½

Electrical Supply (V/Hz) 12/50