Part of Wrekin Water Softeners commercial range

This softener is supplied partailly assembled for shipping. Some assembly will be required. All components and instructions will be supplied.

General Conditions for Installation

Connection IN & OUT: 3/4"
Drain connection: 3/4"
Electrical Rating: 230 VAC 50/60 Hz, 12 VAC Transformer
Power Rating: 3 Watt Average
Minimum inlet pressure : 30 psi (2 bar)
Maximum inlet pressure: 90 psi (6 bar)
Vacuum: no allowance
Average pressure loss (**): 1 bar
Min-max water temperature: 5-35 C

Resin
Type: Strong acid cation resin - softening, food grade quality
Life Span: 15 years under normal circumstances.

This unit is fitted with a Water Save controller that saves 40% waste Water from a conventional softener

Technical Specifications
20L - 0.8m3/hr service Flow, 3.3m3 Capacity
30L - 1.2m3/hr Service Flow, 5.0m3 Capacity
40L - 1.6m3/hr Service Flow, 6.7m3 Capacity
50L - 2.0m3/hr Service Flow, 8.3m3 Capacity
60L - 2.4m3/hr Service Flow, 10.0m3 Capacity
75L - 3.0m3/hr Service Flow, 12.5m3 Capacity
100L - 4.0m3/hr Service Flow, 17.0m3 Capacity

Capacities are base on hardness level of 300ppm